I have a confession; actually it is more of an addiction. I love making mists.

as you can see from this picture of my Misting Box


Sure if I had the budget I would be buying as many as I could get my hands on. However as a budget crafter you cannot beat making your own mists.

It seriously costs you less than about $1 a bottle if you follow my tips.

Lets talk about the Materials you will neeed:


Firstly Invest in Re-Inkers, especially Distress ones. The reason for this is many. There is so much you can do with Re-Inkers above and beyond re inking your stamp pads or using stamping foam to make your own custom stamps or stamp pads for ones you have yet to own the Ink Pad of.

I will actually write up a tutorial on the things you can do with re inkers as I have quite a few.

Anyway back to mists.

Invest in a big jar of your favourite pearl ex powder (pearl, macro pearl or interference gold all make wonderful mists) and some Gum Arabic Powder. Alternately use your perfect pearls or any other mica based pigment powder. Both work really well and will give you different effects. I have used both pearl ex and perfect pearls in mists and love both of them. What I love about pearl ex is the ability to buy a larger jar we can only hope that Ranger will at some point create larger containers for some or all of their Perfect Pearls range.

TIP: Add in your gum Arabic powder straight to your jar of pearl ex and shake well this helps overcome the problem of lumps and having trouble mixing the powder into mists, water colours and other such things. Following the instructions on the bottle of course  ¼ gum Arabic to pearl ex

Invest in your misting or spray bottles. Look on EBay for bulk purchases (here is a link to one of my favourite places to get them from )

You do not have to buy loads to begin with 10 bottles will give you a good range. The reason I prefer the 50ml bottles is that with the mini misters (these are fantastic for a smaller project when you only want a limited amount of a colour) you do not get a lot of use and often in projects I need to make more mist. So the 50ml bottles go quite far and mean that I do not have to make that mist up every time I want to use it.

You will also notice from the photos that I have a 100ml water bottle also purchased cheaply from eBay.

This one will sound a bit odd but also add to your Misting supplies one bottle of each of the cheap food colourings Red, Blue, Green, Yellow and Pink. I got mine at a local supermarket for 99c. These actually make really good mists and can be mixed to make other colours.

A ‘Recipe’ Book to add in a colour sample as well as how much of each Re-Inker or Food Colouring you have used. Also for when you mix your own colours and such.


A Black Sharpie or other Black permanent Marker to write in your Recipe Book and on Your Bottles.

An Eye Dropper and small spoon or scoop.

Water (I use an old soft drink/soda bottle and always have it handy in my craft space)

So now you have all your materials what next?

Now you get to play Mad Scientist and experiment

Let’s start with a Basic Re-Inker Mist pick a colour and let’s begin

Step 1. Fill your bottle with water leaving some room at the top. Remember you can always add more water after you have made your mix but want enough room to add your shimmer powder and re-inker

Step 2. Add a small scoop of your powder (when you have made a few you will discover the joy of trying different combinations of coloured powders for different effects however for the most part I stick to a neutral or golden shimmer so as to make my home made mists more versatile.) Swirl your bottle to mix in your shimmer


Step 3. Now this will depend on the strength of colour of the Re-Inker as well. Colours like spun sugar will no matter how much Re-Inker you add only ever give you the barest hint of colour so choose slightly darker colours if you want bold bright mists. Add in one eye dropper full of your Re-Inker, put your spray nozzle back on and mix well, do a test Spritz on a blank piece of white paper to see if you like the strength of the colour. If it is not strong enough add some more Re-Inker, this takes a little bit of intuition as you may need one or two more eye droppers full or just a few more drops. Think about the depth of colour you want.
I used Forrest Moss and one full eyedropper was more than enough to make the colour


Tip: Start gradually and build up it is far easier than going to dark and having to then turn what would be one bottle of mist into two

Step 4: In your ‘Recipe’ Book write down your recipe with your permanent Marker. Also write it on your bottle


Step 5: Mist your ‘Recipe’ and allow it to dry


And that is it a basic Mist made and ready for you to use

Food Colouring Mists are made in the exact same way. Just substitute Re-Inker for the food colouring and use a bit more caution as the food colouring is very concentrated. You can also use India inks, and other fluid based inks. I really want to try making a mist with brilliance re-inkers as I think you could get a lovely shimmer from them without needing to add perfect pearls or pearl ex.

Tip:  Experiment with making your own colours. Mix Both Re-Inkers and Food Colouring together for some great colours.


Tip: Use Black Soot or Black India ink added a single drop at a time to intensify and darken colours. Do not use with light colours such as pale pinks and yellows as the black will totally take over these colours.

That is it some homemade misting basics.

I love Mists. As a budget crafter for me it is about stretching every craft dollar as far as possible to allow me to be as creative as I can. Home Made mists are a fantastic way to do this.

However the pre made variety are rather awesome. If you’re on a budget look for the value packs and store specials to help you build up your collection or try making your own.



12 Tags Day 6

Hi All

Well day 6 was definitely interesting. I really love the enamelled look but have no foil tape. So I used a Soft Drink (soda can) and also revisited tag 4’s background technique


The last two tags have flown by with such lovely simple and inspiring techniques.


1 Aluminium can or piece of Foil tape

Paint Dabbers in Snow Cap, Red Pepper, Orange Sunset and Yellow Sunset

CB Lace Christmas tree embossing folder

Fine grit sanding stone Nail file (I got 5 of these for under $2 off eBay they are smaller than a burnishing block but have the same sort of effect)

Utee Clear

Versa mark Watermark Ink Pad

Chipped Sapphire Re-Inker

Inkadinkado Christmas Characters (The Snowflakes have been getting a workout this week)

Black soot distress ink

Celebrations of Australia Embossing Ink in Holographic Silver

Heat Gun


  1. Cut off the top, and bottom of your Aluminium can. I do this with fiskars micro touch scissors however you can also do it with a craft knife. However I find the scissors are a way I do not cut myself. Be careful the edges are sharp after cutting. Then cut down the middle, and wipe over the inside with a damp cloth to remove any sticky residue.


  1. Cut a piece to the size you want. Place in your embossing folder so the raised side shows on the non printed side. And emboss


  1. See Mr Holtz’s step by step for colouring and embossing the image to make it look enamelled. Please note I used two coats of Utee to get the glossy glassy effect.


  1. Use the background technique for tag four (either Tim Holtz’s or my version using a paint dabber and re inkers). I used only chipped sapphire this time wanting a night sky effect. Either let dry naturally or use a heat gun to dry it
  1. Stamp snowflakes over the background tag (I used the stamp multiple times embossing after each time). Sprinkle over embossing powder. Shake off excess and use a heat gun to set it. Continue till all the areas of your tag are covered
  2. Cut out the Christmas tree from the background. Heat one of the edges not till melted just to warm the tag. With sharp scissors snip the sides of your tree at regular intervals. Do this on both sides
  3. Heat the first edge and using tweezers or a slotted tool curl up the edges of your tree. Heat the other side and do the same. Heat as necessary along the way to stop the Utee from cracking off the tree
  4. Adhere tree to tag using glossy accents
  5. Add a star to your tree top and that’s it Tag 6 complete we are half way there!